Quick answer: To convert an area, you square the length conversion factor. One metre is 3.28084 feet, so one square metre is 3.28084² = 10.7639 square feet. That’s why 100 m² is 1,076.39 ft², not 328 ft². Going the other way, 1 ft² = 0.092903 m².
For a quick answer, use the area converter. This guide shows why the factor is squared, how to avoid the classic mistake, and how to check your answer.
Key takeaways
- Area units are length units multiplied by themselves, so their conversion factors are squared too.
- 1 m² = 10.7639 ft² (not 3.28). 1 ft² = 0.092903 m² (not 0.3048).
- 1 ft² = 144 in², 1 yd² = 9 ft², 1 m² = 10,000 cm².
- Using the length factor on an area understates the result by about 70%.
- Check by converting the sides first, then multiplying. Both routes should agree.
What Is the Difference Between Linear and Square Units?
A linear unit measures a length along a line: metres, feet, inches, kilometres, miles. A square unit measures a surface: square metres (m²), square feet (ft²), square inches (in²).
A square metre is the area of a square that is 1 metre long and 1 metre wide. A square foot is the area of a square that is 1 foot long and 1 foot wide.
That is the key to everything else: area = length × width. Both lengths are in the same unit, so the unit gets squared (m × m = m²).
Why the Conversion Factor Is Squared
Take a square that is 1 metre on each side.
- In metres: 1 m × 1 m = 1 m²
- In feet: each side is 3.28084 ft, so 3.28084 ft × 3.28084 ft = 10.7639 ft²
It’s the same square, just measured in different units. The side length was multiplied by 3.28084, and the area was multiplied by 3.28084 × 3.28084.
The rule:
Area factor = (length factor)²
| Linear conversion | Length factor | Area factor (squared) |
|---|---|---|
| 1 m to ft | 3.28084 | 10.7639 |
| 1 ft to m | 0.3048 | 0.092903 |
| 1 in to cm | 2.54 | 6.4516 |
| 1 yd to m | 0.9144 | 0.836127 |
| 1 mile to km | 1.609344 | 2.589988 |
How to Convert Square Meters to Square Feet
square feet = square metres × 10.7639
- Take the area in m².
- Multiply by 10.7639.
- Round sensibly.
Example: 100 m²
- 100 × 10.7639 = 1,076.39 ft²
Example: 85 m² (an apartment listing)
- 85 × 10.7639 = 914.93 ft²
Quick reference: m² to ft²
| m² | ft² |
|---|---|
| 1 | 10.76 |
| 10 | 107.64 |
| 20 | 215.28 |
| 50 | 538.20 |
| 100 | 1,076.39 |
| 150 | 1,614.59 |
| 200 | 2,152.78 |
How to Convert Square Feet to Square Meters
square metres = square feet × 0.092903
(or divide by 10.7639)
Example: 1,500 ft² (a home)
- 1,500 × 0.092903 = 139.35 m²
Quick reference: ft² to m²
| ft² | m² |
|---|---|
| 100 | 9.29 |
| 500 | 46.45 |
| 1,000 | 92.90 |
| 1,500 | 139.35 |
| 2,000 | 185.81 |
| 3,000 | 278.71 |
The Classic Mistake: Using the Length Factor on an Area
The most common error is to multiply an area by 3.28 (or 0.3048) instead of 10.76 (or 0.0929).
| Conversion | Wrong | Right |
|---|---|---|
| 100 m² to ft² | 100 × 3.28 = 328 ft² | 100 × 10.7639 = 1,076.39 ft² |
| 120 ft² to m² | 120 × 0.3048 = 36.58 m² | 120 × 0.092903 = 11.15 m² |
How big is the error? Using 3.28 for m² to ft² gives 328 instead of 1,076, which is about 70% too low. Using 0.3048 for ft² to m² gives 36.58 instead of 11.15, which is more than 3 times too high.
A quick sense check: a square metre is a bit more than 10 square feet. So an area in square feet should be about ten times the area in square metres. If your answer is only about 3 times bigger, you used the length factor.
Check Your Answer Two Ways
You can convert an area two ways, and they should agree. This is a good check.
Example: a room 4.5 m × 3.2 m
Route 1: convert the area.
- Area: 4.5 × 3.2 = 14.4 m²
- 14.4 × 10.7639 = 155.0 ft²
Route 2: convert the sides first.
- 4.5 m = 14.76 ft, 3.2 m = 10.50 ft
- 14.76 × 10.50 = 155.0 ft² ✔
Example: a room 10 ft × 12 ft
- Area: 120 ft² → 120 × 0.092903 = 11.15 m²
- Sides: 10 ft = 3.048 m, 12 ft = 3.658 m → 3.048 × 3.658 = 11.15 m² ✔
Area Unit Ladders: Squared
Area ladders are the squares of length ladders. That’s why the numbers look so different.
| Length relationship | Area relationship |
|---|---|
| 10 mm = 1 cm | 100 mm² = 1 cm² |
| 100 cm = 1 m | 10,000 cm² = 1 m² |
| 1,000 m = 1 km | 1,000,000 m² = 1 km² |
| 12 in = 1 ft | 144 in² = 1 ft² |
| 3 ft = 1 yd | 9 ft² = 1 yd² (1,296 in²) |
| 1,760 yd = 1 mile | 3,097,600 yd² = 1 mi² |
You can see the same idea in our guide to metric vs imperial length units, which shows the length ladders that these are built from.
Common Area Conversion Factors
| From | To | Multiply by |
|---|---|---|
| m² | ft² | 10.7639 |
| ft² | m² | 0.092903 |
| m² | yd² | 1.19599 |
| yd² | m² | 0.836127 |
| in² | cm² | 6.4516 |
| cm² | in² | 0.155 |
| km² | mi² | 0.386102 |
| mi² | km² | 2.58999 |
| ft² | in² | 144 |
| yd² | ft² | 9 |
| km² | hectares | 100 |
For land units such as acres and hectares, see our guide to acres vs hectares (planned: /blog/acres-vs-hectares/).
Mental Math for m² and ft²
| Method | Rule | 100 m² | Error |
|---|---|---|---|
| × 10 | drop a zero | 1,000 | −7.1% |
| × 11 | add 10% | 1,100 | +2.2% |
| × 10.76 | exact enough | 1,076 | −0.04% |
| × 3.28 (mistake) | length factor | 328 | −69.5% |
For ft² to m²:
| Method | Rule | Error |
|---|---|---|
| × 0.09 | easy | −3.1% |
| ÷ 11 | −2.1% | |
| × 0.093 | close | +0.1% |
Handy rule: m² × 10.76 for feet, and ft² × 0.093 for metres. For a rough idea, “ten and a bit” or “a tenth” is fine.
“Feet Square” vs “Square Feet”
Language adds confusion.
- 10 square feet means an area of 10 ft².
- 10 feet square (or “10 by 10 feet”) means a square that is 10 ft on each side, which is 100 ft².
Likewise, “a room 12 feet square” is 144 ft², not 12 ft². Always check which one a plan or listing means.
What About Volume?
Volumes follow the same logic, except the factor is cubed: 1 m³ = 3.28084³ = 35.3147 ft³. The rule is: length factor for length, squared for area and cubed for volume.
Where You Need Area Conversions
- Property listings: apartments and homes quoted in m² or ft².
- Flooring, tiles and paint: buying by the square metre or square foot.
- Construction and architecture: plans in one unit, products in another.
- Land: acres, hectares and local units.
- Planning and travel: national park or city sizes in km² or mi².
For worked room examples, see our guide to calculating room area (planned: /blog/how-to-calculate-room-area/).
Common Mistakes
- Using the length factor for area. Square it.
- Squaring the wrong way. m² to ft² uses 10.76 (larger), not 0.0929.
- Mixing “square feet” and “feet square”.
- Rounding the factor too early. Use 10.7639, not 10.
- Converting one side and not the other in a length × width calculation.
- Forgetting that mm² and cm² differ by 100, not 10.
- Using a linear table for an area. Always check the unit has a ² on it.
How to Convert Area Units: FAQs
How do I convert square meters to square feet?
Multiply by 10.7639.
How do I convert square feet to square meters?
Multiply by 0.092903, or divide by 10.7639.
Why is 1 m² not 3.28 ft²?
Because an area has two dimensions. Both sides are multiplied by 3.28, so the area is multiplied by 3.28 × 3.28 = 10.76.
How many square feet are in a square yard?
9.
How many square inches are in a square foot?
144.
How many square centimetres are in a square metre?
10,000.
How many square metres are in a square kilometre?
1,000,000.
What is 50 m² in square feet?
538.20 ft².
What is 1,000 ft² in square meters?
92.90 m².
Is a square meter bigger than a square foot?
Yes. 1 m² is about 10.76 ft².
How do I convert an area from one unit to another in general?
Convert the length factor, square it, and multiply.
Convert Any Area in Seconds
For exact results, use the ConversionFree area converter to switch between square metres, square feet, acres, hectares and more. You can also browse our unit conversion tools, or visit the ConversionFree for other free tools.